Home Forums Conversions MK2 Coach Conversion Reply To: MK2 Coach Conversion

#1292
Richard S
Participant

I found the best method was to tease one end of the transfer off with some pinpoint sharp tweezers and hold it down while pulling the paper out from underneath along its length, hopefully getting it roughly in the right place! Once it’s in roughly the right place I found you can lift the end of the transfer up and re-lay it in a better position if needed before teasing it in to position with the point of the tweezers by pushing it up against the masking tape. To get it ultimately as straight as line as possible I found pulling the transfer with the point of the tweezers along the length of the transfer working my way along about 5mm at a time drags it straight.

As soon as I was happy with it I removed the masking tape before it had a chance to stick to the transfer (I was getting paranoid by this point)